Composition and distribution of polycyclic aromatic hydrocarbons in the surface sediments from the Susquehanna River

Polycyclic aromatic hydrocarbon (PAH) concentrations in 34 surface sediments along the Susquehanna River were investigated in 2000. The total concentrations of PAHs in the surface sediments of Lake Clarke, Lake Aldred, the upper Conowingo Reservoir, and the lower Conowingo Reservoir were 3.3+/-1.5 microg g-1 (n=9), 1.6+/-1.3 microg g-1 (n=4), 9.8+/-5.5 microg g-1 (n=7), and 4.0+/-1.2 microg g-1 (n=14), respectively. These represent the first comprehensive measurement of PAHs in Susquehanna River surface sediments. Overall, total PAH concentrations were relatively lower in Lake Aldred, which is more shallow and sloped, and significantly higher in the upper Conowingo Reservoir. The sediment PAH levels were related to river flow rates, which are indirectly correlated with the particle size of the surface sediments. Total PAH levels in all the studied sites were below the effects range median (ERM) of 44.8 microg g-1 with 38% (13 of the 34 sampling sites) exceeding the effects range low (ERL) of 4.02 microg g-1. Principal component analysis indicated that variations in the PAH compound patterns of each reservoir decreased from upstream to downstream, indicating that the surface sediments were mixed along the Susquehanna River. The PAH patterns in the lower Conowingo Reservoir sediments were a combination of those upstream sources. Source analysis using isomer ratios as indicators suggested that PAHs in the Susquehanna River surface sediment are derived from the combustion of fossil fuels such as coal and gasoline with coal as the major source of contaminants.     

Removal of arsenic in tailings by soil flushing and the remediation process monitoring

In order to investigate the optimum conditions for the application of soil flushing of arsenic, a batch test was carried out using EDTA at various concentration and pH levels. Based on the optimum condition derived from the batch test, a column test was conducted to examine the feasibility of the soil-flushing technology under field-equivalent conditions. In this column test, a low flushing solution flow rate showed a significantly higher As removal efficiency (71.6%) than a high flow rate (56.3%). TCLP (toxicity characteristic leaching procedure) and a seed germination test were carried out to monitor the toxicity both during and after the treatment. The finally treated tailings were shown to be significantly remediated, having a reduced toxicity by both the TCLP and seed germination tests.     

Reductive dissolution and sequestration of arsenic by microbial iron and thiosulfate reduction

Environmental Geochemistry and Health - Iron oxide and oxy-hydroxide are commonly used for remediation and rehabilitation of arsenic (As)-contaminated soil and water. However, the stability of As...     

Colloid mobilization and heavy metal transport in the sampling of soil solution from Duckum soil in South Korea

Environmental Geochemistry and Health - Colloid mobilization is a significant process governing colloid-associated transport of heavy metals in subsurface environments. It has been studied for the...     

不同好氧预处理方式对餐厨垃圾产甲烷的影响

为了研究不同好氧预处理方式对餐厨垃圾厌氧消化产甲烷的影响,通过建立3个模拟厌氧生物反应器,研究了传统厌氧生物反应器C1、上层好氧预处理-厌氧生物反应器C2和底部好氧预处理-厌氧生物反应器C3 3种不同操作条件下的产甲烷过程.结果表明,挥发性有机酸的累积使C1始终处于产甲烷滞后阶段;而C2、C3的好氧预处理通过加快易水解酸化组分和过量挥发性有机酸的好氧降解,有效缓解了酸性抑制,产甲烷滞后时间明显缩短至10 d内.第32天C2停止上层曝气后,在27 d内甲烷浓度达到了50％以上,同时,产甲烷速率迅速上升,并在第81天可达到峰值773 mL/(kg·d).C3在第11天停止底部曝气后,虽然经过22 d的时间甲烷浓度即上升至50％,但之后产甲烷速率经历回落阶段后再次逐渐上升,在实验结束时仅达到517 mL/(kg·d).上层曝气的好氧预处理方式所需曝气时间相对较长,但其产甲烷启动快,与底部曝气相比,其后期的甲烷化过程更稳定并可达到较高的产甲烷速率.     

Photocatalytic reduction of carbon dioxide over Cu/TiO<Subscript>2</Subscript> photocatalysts

The photocatalytic reduction of CO₂ with H₂O was investigated using Cu/TiO₂ photocatalysts in aqueous solution. For this purpose, Cu/TiO₂ photocatalysts (with 0.2, 0.9, 2, 4, and 6 wt.% of Cu) have been synthesized via sol-gel method. The photocatalysts were extensively characterized by means of inductively coupled plasma optical emission spectrometry (ICP-OES), N₂ physisorption (BET), XRD, UV-vis DRS, FT-IR, Raman spectroscopy, TEM-EDX, and photoelectrochemical measurements. The as-prepared photocatalysts contain anatase as a major crystalline phase with a crystallite size around 13 nm. By increasing the amount of Cu, specific surface area and band gap energy decreased in addition to the formation of large agglomeration of CuO. Results revealed that the photocatalytic reduction of CO₂ decreased in the presence of Cu/TiO₂ in comparison to pure TiO₂, which might be associated to the formation of CuO phase acting as a recombination center of generated electron-hole pair. Decreasing of photoactivity can also be connected with a very low position of conduction band of photocatalysts with high Cu content, which makes H₂ production necessary for CO₂ reduction more difficult.     

Overtime work as the antecedent of employee satisfaction,firm productivity,and innovation

Overtime work has been blamed for the deterioration of employee satisfaction and productivity. However, the organization‐level implications of overtime work as a normative expectation remain unclear. In this study, such effects were analyzed through human capital theory and a causal attribution approach. Various organizational outcomes and boundary conditions were explored in explaining these implications. The analysis of time lagged data from 273 firms affirmed that a firm's overtime level was related negatively to employee satisfaction. However, it was positively related to the firm's productivity and curvilinearly (inverted U‐shaped) related to innovation. The effects of the firm's overtime level on firm productivity and innovation were also moderated by organizational trust. This study highlights the costs and benefits of overtime work as tools for utilizing human capital and reveals the critical contingency of organizational trust that enables firms to attenuate the costs of the overtime level and accentuate its potential benefits.     

Removal of arsenic in tailings by soil flushing and the remediation process monitoring

In order to investigate the optimum conditions for the application of soil flushing of arsenic, a batch test was carried out using EDTA at various concentration and pH levels. Based on the optimum condition derived from the batch test, a column test was conducted to examine the feasibility of the soil-flushing technology under field-equivalent conditions. In this column test, a low flushing solution flow rate showed a significantly higher As removal efficiency (71.6%) than a high flow rate (56.3%). TCLP (toxicity characteristic leaching procedure) and a seed germination test were carried out to monitor the toxicity both during and after the treatment. The finally treated tailings were shown to be significantly remediated, having a reduced toxicity by both the TCLP and seed germination tests.     

Investigation of acute toxicity of chlorpyrifos-methyl on guppy Poecilia reticulata

Static bioassays were made to determine acute toxicity of chlorpyrifos-methyl, a wide spectrum organophosphorus insecticide and potential toxic pollutant of aquatic ecosystem, Guppy fish (Poecilia reticulata). Bioassays were made at a regulated temperature of 22+/-1 degrees C and were repeated three times. Lethal doses of the insecticides were determined using LC50 software programme of U.S. EPA based on Finney's Probit Analysis statistical method. The 96 h LC50 value and 95% confidence limit of chlorpyrifos-methyl for Guppy was estimated as 1.79 (1.47-2.10) mg/l. The fish exposed to chlorpyrifos-methyl exhibited behavioral changes in the form of neurotoxin toxicity: less general activity than control group, loss of equilibrium, erratic swimming and staying motionless at a certain location generally at mid-water level for prolonged periods. The 1 mg/l (lowest) concentration had similar behavior (NOEC) with the control group.